AK Certified Roofing logo
Completed standing-seam metal roof installation by AK Certified Roofing — drone view

Metal Roof Replacement in Palm Coast

Standing-seam and metal roofing systems for salt air, summer heat, and hurricane season.

Owens Corning Platinum Preferred Contractor GAF Certified Plus EPA Lead-Safe Certified Firm Haag hail and wind damage training Versico Authorized Contractor 303882

Thinking about a metal roof in Palm Coast? Here's the honest picture: metal costs more upfront than shingle, and in return it can last decades — often two to three times the life of an asphalt roof — while shrugging off coastal wind, reflecting Florida heat, and standing up to salt air with the right panel and coating. AK Certified Roofing installs metal roofing systems across Palm Coast, Flagler, and Volusia, documents every stage in photos, and prices metal and shingle side by side so you can make the call with real numbers.

Why coastal homeowners go metal

Decades of service life — often two to three times a shingle roof's span
Wind performance — interlocking panels engineered for coastal weather
Cooler in summer — reflects heat instead of soaking it in
Salt-air resilience — the right metal and finish for beachside living

Metal or shingle — the straight comparison

Metal wins on lifespan, wind, and cooling. Shingle wins on upfront cost and matches most neighborhoods out of the box. The right answer depends on your budget, how long you're staying, and your home's style — so we quote both, walk you through the long-run math, and tell you what we'd do if it were our house. No pushing you up a price tier you don't need.

What a metal install includes

Full tear-off and deck inspection, self-adhered underlayment, the panel system fastened and flashed to manufacturer spec, and the trim details — ridge, eave, valleys, penetrations — done right, because on a metal roof the details are the roof. Every stage photographed and documented.

Standing-seam metal roof by AK Certified Roofing.

What homeowners tell us

Excellent job! I would definitely recommend their business. They're thorough and quick and the ending job is beautiful.— Honest R.
A very clear and complete quote that was also very competitive, with a schedule they kept to almost to the minute.— Nextdoor recommendation, Palm Coast

Why Palm Coast homeowners choose AK

Owens Corning Platinum Preferred — top-tier certified installer
Family-owned in Palm Coast since 2017 — we live on this coast too
Licensed & insured — CCC1331606 · CBC1268928 · CRC1331920
Every roof documented — photos from tear-off to final trim
Standing seam metal roof on an oceanfront home in Flagler County, Florida

Metal Roof Questions Homeowners Actually Ask

How long does a metal roof last on the Florida coast?

Properly installed and properly specified, decades — considerably longer than asphalt in the same conditions. The variables that matter here are the metal itself, the coating, and the fastening system. Salt air is the deciding factor near the water, and it is the reason material choice matters more on the coast than it does inland.

Will it rust this close to the ocean?

Not if the right system goes on. Galvalume and aluminum behave very differently in salt air, and so do coatings. Aluminum is generally the answer closest to the water. This is a specification decision we make with you at the estimate based on how far you are from the Atlantic and what is around your home — not a one-size answer.

Pewter standing seam metal roof on a beachfront Florida home

Is a metal roof loud when it rains?

Not the way people expect. The noise people remember comes from bare metal over open framing — a barn or a carport. On a house with decking, underlayment and insulation beneath it, a metal roof is closer to a shingle roof than to what you are picturing.

What does a metal roof cost compared to shingle?

More up front, and the gap is real. What changes the math is service life: metal is generally a once-in-a-lifetime roof where asphalt in this climate is not. What drives your number specifically is square footage and pitch, the system chosen — standing seam costs more than exposed fastener and performs differently — panel gauge and finish, and the complexity of the roof. Ranges you find online are not your roof, so we do a free written estimate and give you the real number in writing before anything starts.

Standing seam or exposed fastener — which do I want?

Standing seam hides its fasteners under the seam, which removes the most common long-term leak point and generally lasts longer. Exposed fastener is less expensive up front and its washers need attention over time. Which one fits depends on the roof, the exposure and the budget, and we will give you a straight recommendation rather than defaulting to the more expensive one.

Standing seam metal roofs on Atlantic oceanfront homes in Palm Coast

Can metal go over my existing roof?

Sometimes, and sometimes it should not. It depends on the condition of what is underneath, what the decking looks like, and what the local code allows. Going over a failing roof hides problems you will pay for later. We tell you which situation you are in after we have actually looked.

What warranty comes with a metal roof from AK?

Ten years of workmanship coverage in writing on metal systems, alongside the manufacturer's material and finish warranty. Terms and any optional upgrades are confirmed in the final written contract.

Will a metal roof change my insurance?

That is between you and your carrier, and we are not permitted to advise you on coverage. What we can do is document exactly what was installed — system, gauge, fastening, attachment details — and put it in writing for you. What that is worth on your policy is your insurer's decision, and it varies by carrier.

Get both numbers

Metal and shingle, priced side by side — decide with real information.

Serving Palm Coast, Flagler, Volusia, St. Johns and surrounding Northeast & Central Florida.

AK Certified RoofingReal fast answers · (386) 302-9063